Upcoming Reports

Browse our upcoming reports on the latest and highly sought-after topics across a range of sectors.If you need further assistance, please contact our representative on: +44 (0) 020 7692 8790 or send an email to hari.t@futuremarketinsights.com

Showing 6781 to 6800 Of 6806 Upcoming reports

  • Global Concrete Admixtures Market Analysis

    Upcoming | REP-GB-74

    +

    Cement is the most common binding material used in construction activities. Cement is mixed with crushed rocks, sand and water in specific proportion to createconcrete. Admixtures are chemicals that are added to concrete at the initial mixing stage to enhances or modify the working properties of the mix. Concrete admixtures are primarily used to enhance the compressive strength, workability and durability parameter of the concrete and to reduce the water content in it.  Read More

  • Global Medical Electronics Market Analysis

    Upcoming | REP-GB-72

    +

    Medical electronics is a branch of electronics that deals with design, implementation and use of electrical devices and equipment for medical purposes such as research, examination, diagnosis, treatment, assistance and care.  Read More

  • Asia Pacific Waterproofing Chemicals Market Analysis

    Upcoming | REP-AP-71

    +

    Waterproofing chemicals are a specific set of products that protect the structural integrity of buildings from water penetration. Excess water penetration in buildings can shorten theirlife span, thus leading to electrical, metal and health hazards. Waterproofing chemicals increase the shelf life of concretes and offer durability to infrastructures when applied to the exterior of a foundation system. These functions lower the maintenance cost of buildings. Rise in construction cost and raw material are the driving factors for the waterproofing industry. Read More

  • Global Wearable Electronics Market Analysis

    Upcoming | REP-GB-70

    +

    The market is constantly witnessing innovative product development, offering enhanced functionality and display. This plays a key role in pushing the demand for wearable electronics in the market. Increasing user-friendliness of electronic wearable gadgets is another factor supporting their popularity among consumers. Read More

  • Latin America Mining Equipments Market Analysis

    Upcoming | REP-LA-68

    +

    The mining industry is expected to witness growth with a single digit CAGR over the next six years on account of the further expanding demand for metal and mineral commodities. Latin America accounted for about 8% of the global mining equipment demand in 2013 and its contribution towards global mining equipment sales was registered at 15% for the same year.  The region serves as the prime destination for mining exploration and investment at a global level. Read More

  • Global Gas Leak Detectors Market Analysis

    Upcoming | REP-GB-67

    +

    A gas leak detector is a piece of equipment or a device that senses and detects the existence of gases in a particular area. These devices are used as a part of safety systems installed in factories, homes and commercial complexes. A gas leak detector system detects the gas leaked and generates a signal to take proper action. Industrially, gas detector systems are fitted with a sound alarm to evacuate the area in case of toxic gas leakage. Read More

  • Global Wireless Charging Market Analysis

    Upcoming | REP-GB-66

    +

    Wireless charging is the process of recharging batteries of electrical devices without using physically connected electric cables. The communication between transmitter (power source) and receiver (device) is generally by microwave or electromagnetic induction.  Read More

  • Global Fuel Cell Market Analysis

    Upcoming | REP-GB-65

    +

    Fuel cells convert electrical energy sourced from chemical energy, through an electromechanical reaction with oxygen or other oxidizing agents. Primarily, a fuel cell functions as a battery, but is different in the way that in a fuel cell, fuel is supplied from an external source and fuel is converted to electricity without any involvement of a burning process. The demand for alternative energy sources is growing at a global level, which in turn propels the development of associated products. Read More

  • Global Wireless Power Transmission Market Analysis

    Upcoming | REP-GB-63

    +

    Wireless power transmission (WPT) or wireless power transfer refers to the transfer of energy or power from one place to another without being connecting through wires. In this, electromagnetic energy is transferred from power sources to electric loads.Wired transmission is the most commonmode of transmitting electrical energy. Its main drawback, the loss of energy during transmission, drives the demand for wireless power transmission. Read More

  • Global E Tailing Market Analysis

    Upcoming | REP-GB-62

    +

    Electronic retailing, commonly known as e-tailing, is one of the most significant subsets of the global e-Commerce industry. The global e-tailing market accounts for a significant revenue share of the global e-commerce market, owing to its dominance in online business and trade operations. Read More

  • Global Surface Mining Market Analysis

    Upcoming | REP-GB-61

    +

    Surface mining refers to the mining technique where the overlying layer of soil and rock is removed, followed by the recovery or excavation of the underlying minerals. This method of mining provides considerably better recovery, safety, flexibility, environmental conditions and grade control as compared to other mining methods such as underground mining. The technique of surface mining gained momentum in the 16th century and has been widely prevalent at a global level, especially in North America. Read More

  • Global Microgrid Market Analysis

    Upcoming | REP-GB-59

    +

    A microgrid is a modern small-scale electricity system used to generate, distribute and regulate the flow of electricalpower. It includes distributed energy resources and multiple loads which enable it to interconnect with other electrical grids as well as operate in a parallelpower generation environment. Read More

  • Global Energy Harvesting Market Analysis

    Upcoming | REP-GB-58

    +

    During the past decade, there has been growing demand for safe, power efficient, and enduring systems, which require minimum or no maintenance. This is a major driver of market growth, expected to continue pushing the demand for devices based on the energy harvesting technology. Growing applications of the energy harvesting technology in building and home automation is another key driver to the market growth. Read More

  • Global Cyber Security Market Analysis

    Upcoming | REP-GB-57

    +

    Cyber security is related to information technology security, which focuses on protecting networks, computers programs and data from unauthorized access. Defense and military, government, financial institutions and corporation etc. collect and store confidential information on computers and transfer that data across networks. In order to protect this data and information from cyber attack cyber security becomes necessary.  Read More

  • Global Compact Construction Equipment Market Analysis

    Upcoming | REP-GB-53

    +

    Construction equipment industry comprises of a wide rangeof heavy machines which perform specific tasks for various applications. Construction equipment can be classified according to the size and capability of the construction machinery.However, there have been a few changes in their classification based on design specifications and cost effectiveness. Compact construction equipment is an emerging term used in the construction equipment industry due to its utility advantages. Read More

  • Global Cloud Ran Market Analysis

    Upcoming | REP-GB-52

    +

    Cloud-RAN,orCentralized-RAN (C-RAN) is an advanced cellular network architecture for mobile network infrastructure that can support 2G, 3G and 4G system and meet wireless communication benchmarks. Cloud-RAN is outpacing traditional cellular network system as it doesn’t require RF (radio frequency) equipment, antenna, BTS (baseband unit) and digital processor to be deployed in the cell site.  Read More

  • Brics Aerial Work Platforms Market Analysis

    Upcoming | REP-BR-51

    +

    Mobile work platforms that can be used by workers and technicians etc to physically or manually reach inaccessible areas are known as aerial work platforms (AWPs). These platforms are supported by lifting mechanisms; usually cranes or vehicle-mounted equipment. AWPs are widely used in construction and mining industries, owing to the nature of work, complexity in structural design and elevation. Read More

  • Global Microturbines Market Analysis

    Upcoming | REP-GB-50

    +

    The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, types, technology and applications.  Read More

  • Global Digital Signage System Market Analysis

    Upcoming | REP-GB-49

    +

    Digital signage system,also termed as dynamic signage system,is used for transmitting and displayingdigital contents, such as animations, audio-visual, text and images.The system composites a playback device, a network and server, software and display device.The player or playback device is responsible for repetition of content onto the screen.  Read More

  • Global Conveyor Systems Market Analysis

    Upcoming | REP-GB-48

    +

    Automation in every industrial segment has become an integral part of industrial operations. Conveyor systems are mechanically-operated material handling equipment, which are used to transport material within premises. They provide a quick and effective transportation solution with a high degree of safety. Therefore, due to effectiveness of conveyance, a considerable amount of cycle time is reduced in the industrial process. The same factor helps in reducing the errors in handling manual material. Early commercialisation of the conveyor system took place for transportation of heavy materials in the industrial sector. Read More

Showing 6781 to 6800 Of 6806 Upcoming reports