Asia Pacific Gasoline Injection Technologies Market

Asia Pacific Gasoline Injection Technologies Market Overview (2022 to 2032)

The Asia Pacific gasoline injection revenue by the end of 2021 was US$ 12.1 Billion. The market is expected to reach US$ 33.4 Billion; by 2032, as it is estimated to grow at a CAGR of 9.8% from 2022 to 2032.

Attributes	Details
Estimated Year (2022) Market Value	US$ 13.1 Billion
Projected Year (2032) Market Value	US$ 33.4 Billion
CAGR% (2022 to 2032)	9.8%
Top 5 Vendor Market Share	Around 35%

An internal combination of engines that runs on gaseous. Gas engines work with different gases like biogas, exhaust gas, landfill gas, natural gas, and landfill gas syngas. Gasoline direct injection knowing also as petrol direct injection. It is a combination of engines that runs on gasoline fuel injected into the combination tank. The usage of gasoline will increase engine efficiency and particular power output and also reduce emissions. The key factors to boosting demand contain, rising automotive production

Increasing various applications from consumer preference industries like the automotive sector, and electricity generation, have a positive impact comes across on gasoline injection market. Also, adoption in the commercial field, and rising demand for efficient and clean power generation technology. Likewise, rising industrialization activities and urbanization impact market growth.

Asia Pacific gasoline injection market consists of 36% of the global gasoline injection market.

2017 to 2021 Asia Pacific Gasoline Injection Demand Outlook Compared to 2022 to 2032 Forecast

The Asia Pacific gasoline injection market is estimated to grow at a CAGR of 9.8% for the forecast period.

With growing concern about air quality, specific measures are being implemented globally to adopt stricter vehicular regulations to reduce burning hydrocarbons, nitrogen oxide, and specific matter. Various technologies are at work on this to maintain levels of pollutant-reduced carbon from the atmosphere.

GDI (Gasoline direct injection) reduces vehicular pollution and increases its efficiency and performance at an appropriate cost. The company's analysis found that the injection of gasoline voltage signal contains clear information. of the quantity of fuel delivered.

We can calculate in real time the actual amount of fuel injection during the operation of this strategy of GDI. When ballistic behavior occurs, it enables multiple injection strategies of the GDI engine.

Increase in the Production of Automotive Vehicles and Urbanisation Driving the Demand for Gasoline Injections

Consumers in Asia Pacific countries are showing a preference for fuel-efficient vehicles, leading to a larger capture market of MPFI technologies in the gasoline injection market.

Also Increasing urbanization led to a considerable increase in the number of end users purchasing cars and motor vehicles, due to this, focus on fuel efficiency, customers in Asia Pacific have a high tendency to prefer fuel efficiency rather than any other features.

Country wise insights

Increasing demand for passenger vehicles will fuel Gasoline Injection Technologies market expansion in India

The need for gasoline injection technologies is anticipated to increase due to India's aggressive automotive market growth. Due to the increase in passenger car sales and emerging markets, where the major international players are relocating, the industry has been expanding quickly. The market for gasoline injection systems is also receiving a much-needed boost thanks to technological developments. The market for gasoline injection technologies is anticipated to grow significantly as a result of India's rapid increase in car production.

India's consumers are more likely to choose fuel economy over other attributes. The market for gasoline injection technologies is expanding as a result of vehicle manufacturers implementing the most recent technology to satisfy this customer's mood.

Development in Automation Industry Driving Gasoline Injection Technologies Market in China

Nearly one-third of the world's automobiles are produced in China. The biggest market, China, is experiencing a progressive tightening of emission rules and laws for cars. Opportunities for GDI technology integration in the industrial process are being created by worries about China's rising pollution levels.

The number of people choosing to purchase cars and other motor vehicles over using public transportation has significantly increased as a result of growing urbanization. The preference for fuel-efficient automobiles among consumers in China is increasing, which is causing gasoline injection technologies to expand.

Growth in the Adoption of Gasoline Injection Technologies in Japan

Injection technology has advanced in Japan as a result of efforts to provide high-performance automobiles with decent fuel efficiency and minimal emissions. The technology that offers the most promise for growth in Japan is GDI. Increasing vehicle economy is anticipated to provide car makers with cost-effective alternatives. Automotive OEMs have recognized the necessity to build an engine that runs on gasoline and fulfills the toughest emission regulations while giving a greater performance in power and economy due to the restricted availability of alternative fuels such as CNG or LNG in Asia Pacific. As a result, the market for gasoline injection technology in Japan is anticipated to increase significantly in the future.

Demand for increased fuel economy and decreased CO2 emissions are still at an all-time high, in the Japanese automotive industry. As a result, a wide range of cutting-edge technologies has been implemented by the auto industry to accomplish performance objectives while also achieving the best possible fuel economy.

A new, reasonably priced fuel injection system for small motorcycles was created by Denso Corporation (Japan), a major player in the automotive fuel injection system market. This is the first fuel injection system in history that does not employ an engine temperature sensor or a throttle position sensor.

Category wise Insights

Why Fuel Injectors Segment Has the Larger Market Share?

Due to the high demand for fuel supply as well as due to lower emission levels, the segment of fuel pumps will hold a dominant market share.

Because of the pumps' critical function in transferring precisely measured amounts of fuel directly to the combustion chamber, which lowers inefficiencies and boosts power, they retain a lopsided market share for gasoline direct injection. Due to the widespread adoption of technologically advanced features in lowering pollution levels related to greenhouse gases, the gasoline pump industry is anticipated to lead.

Due to these factors, the fuel injector segment had a larger market share of 45.5% in 2021.

Why does the Rising Purchase Rate of the four-cylinder category Boost Demand for the Gasoline Injection Technologies Market?

The 4-cylinder category will hold the biggest market share by engine type, accounting for more than half of the global gasoline direct injection (GDI) system market. This is due to the development of lightweight engines, improved fuel efficiency, fewer emissions compared to 6-cylinder engines, and lower production costs.

How Preference Towards passenger vehicles is Driving the Vehicle Type Segment Rising?

Due to its high production rate and gasoline-powered engine use, the passenger vehicle segment is expected to maintain its market dominance.

Since most passenger cars run on gasoline or gasoline-based fuel, gasoline direct fuel injection technology is widely used in passenger cars. Private transportation, mainly in developing nations like China, India, and others, is the main driver of the demand for passenger automobiles. Due to its leading market position, gasoline-powered direct injection in passenger vehicles is expected to see an increase in demand as the global middle class grows.

For these reasons, the passenger vehicles segment held the largest market share of 62.4% for the forecast period.

Why Does the Sales Channel, Original Equipment Manufacturer Sector Hold a Major Market Share in Gasoline injection technology market by 2032?

Gasoline injection technology is divided on the basis of easily available variants, for example, gasoline direct injection (GDI) and multi-point fuel injection (MPFI). The parts of gasoline injection technology include fuel ignition systems, fuel pumps, electronic control units, and fuel injectors. Development in this injection technology has led to the development of fuel injection technology for three-wheeler and two-wheeler segments. MPFI engines with n-cylinders for n-injectors are used.

These technologies are directly available at the original equipment manufacturers and they also have the necessary resources which can help them manufacture these technologies, these vendors are sought by car manufacturers. Due to these reasons, OEM has the highest market share by sales channel and held a market share of 54.5% in 2021.

Competitive Landscape

With increased investments in advanced design and research, numerous small firms are working on gasoline injection technologies with the aim of producing an efficient, low-pollution engine powertrain. Important companies like Denso, Bosch, and BorgWarner Inc. will probably make investments in Research and Development projects and technological development to broaden the global market.

• In February 2022, Due to its knowledge of the Standard Rail System (CRS), Denso Corporation was able to assist automakers all over the world in developing more responsive, effective, and dependable automobiles. The company has successfully marketed its GDI system with cutting-edge fuel injectors, electronics, and pumps.
• In January 2021, Hitachi Automotive Systems, Showa Corporation, Nissin Kogyo, and Keihin Corporation concluded their management integration and formed Hitachi Astemo Ltd. The conglomerate will offer advanced mobility solutions, powertrain systems, chassis systems, and advanced driver systems, designed for both cars and motorcycles.

Scope of report

Attribute	Details
Market value in 2021	US$ 12.1 Billion
Market CAGR 2022 to 2032	9.8%
Share of top 5 players	Around 35%
Forecast Period	2022 to 2032
Historical Data Available for	2017 to 2021
Market Analysis	USD Billion for Value
Key Countries Covered	India, Indonesia, Malaysia, Thailand, Singapore, Australia and New Zealand, China, Japan, South Korea, and the Rest of Asia Pacific
Key Segments Covered	Component, Vehicle Type, Technology, Sales Channel, and Country
Key Companies Profiled	Mitsubishi Electric Auto Parts Bajaj Auto Delphi Automotive LLP Continental AG Denso Corporation United Automotive Electronic Systems Co. Ltd Dongguan Keihin Engine Management System Co.Ltd. Marelli Holdings Co., Ltd. Hitachi Myotonic corp Stanadyne Changshu Corporation Kawasaki heavy industries ltd Mahindra & Mahindra Ltd Tata Motors
Report Coverage	Market Forecast, Company Share Analysis, Competition Intelligence, Drivers, Restraints, Opportunities and Threats Analysis, Market Dynamics and Challenges, and Strategic Growth Initiatives
Customization & Pricing	Available upon Request

Asia Pacific Gasoline Injection by Category

By Component:

• Fuel Injectors
• Fuel Pressure Regulator
• Fuel Pump
• Engine Control Unit

By Engine Type:

• 4 cylinder
• 6 cylinder
• 8 cylinder
• Others

By Vehicle Type:

• Passenger Cars
• Commercial Vehicles

By Technology:

• Gasoline Port Injection
• Gasoline Direct Injection

By Sales Channel:

• Original Equipment Manufacturer
• Aftermarket

By Country:

• India
• Indonesia
• Malaysia
• Thailand
• Singapore
• Australia and New Zealand
• China
• Japan
• South Korea
• Rest of Asia Pacific

Frequently Asked Questions

Which are some leading companies which offer Asia Pacific gasoline injection?

Some leading the Asia Pacific gasoline injection are Mitsubishi Electrical, Bajaj Auto, Continental AG, and Tata Motors.

Which country is expected to showcase high growth in Asia Pacific gasoline injection demand?

Indonesia is estimated to have the highest growth for the Asia Pacific gasoline injection during the forecast period at 11.2%.

What is the driving demands for implementing in Asia Pacific gasoline injection?

Enhanced fuel efficiency is driving the demand for gasoline injection technologies in Asia Pacific region.

Which component had the largest market share for the Asia Pacific gasoline injection in 2021?

Fuel injectors had the largest market share for the Asia Pacific gasoline injection at 45.5% in 2021.

Which component has the highest CAGR for the Asia Pacific gasoline injection?

The fuel pump has the highest CAGR of 10.2% for the forecast period.

Which are the top five countries for Asia Pacific gasoline injection?

India, China, Japan, Australia, and Indonesia.

What was the market share of India for Asia Pacific gasoline injection in the year 2021?

The market share of India for the year 2021 for the Asia Pacific gasoline injection was 33.3%.

What was the market share of Japan for the year 2021 for Asia Pacific gasoline injection?

North America had a market share of 28.6% in 2021 for Asia Pacific gasoline injection.

What is the CAGR of India for the forecast period?

India has a CAGR of 10.9% for the forecast period 2022 to 2032.

What is the estimated market value of Asia Pacific gasoline injection for 2023?

The estimated market value for Asia Pacific gasoline injection for the year 2023 is US$ 14.2 Billion.

What is the growth rate for China for Asia Pacific gasoline injection for the forecast period?

For China, the CAGR for the forecast period is estimated to be 8.8% for the Asia Pacific gasoline injection.